Check the position of the router Checking the position of the router seems trivial, but the effect can be big. Router works to send signals in all directions. Therefore, you should place the router in the middle of the room. When the router is placed next to a window, a signal is sent to the outside. This will make the WiFi useless and not reach all parts of the room.
2. Don’t put it on the floor Get information, inspiration and insight in your email. Register email Place the router in a high place, such as a desk or cupboard. A higher position will be advantageous because the router is designed to send a signal down. In addition, the floor contains cement, concrete and metal materials that are difficult for WiFi signals to penetrate.
3. Place the router in the best place The WiFi signal will radiate more strongly in the room where you store the router. On that basis, you should put the router in a room that you often occupy when using the internet.
4. Choose an open area There are many materials that can absorb the router’s signal and reduce its performance. To maintain optimal signal performance, we recommend that you do not place the router between large furniture and a wall, or in a closet. Choose a position that is free from crush and makes the router visible from anywhere.
5. Keep away from other electronics Keep your router away from other electronic devices, such as microwaves, cordless phones, and TVs. Any device that generates electromagnetic signals can interfere with and weaken the performance of the WiFi signal.
6. Adjust the antenna so that the router’s antenna is in a vertical position. This position will make the signal radiate horizontally so that the WiFi signal more easily reaches all parts of the room.
7. Check signal strength There are a number of applications, such as Cloudcheck or Amped that can be used for this purpose. When checking the signal, you can map which parts receive a strong signal and which receive a weak signal.
8. Set the router software You can also speed up the WiFi connection by entering certain settings in the router software. Access to this software can be opened via a special IP. You can check on the bottom of the router or in the manual that came in the box. After entering the settings menu, change the router’s frequency channel. Usually there are 14 channels to choose from. The best channels are usually 1, 6, and 11. These channels tend to have minimal interference because they rarely come into contact with channels used by other people. In addition to channel settings, also check for firmware updates. Usually router manufacturers will issue firmware updates to improve device performance.
9. Do a speed test Do a speed test to find out where your connection problem is. First try to do it with a WiFi connection, then do the same thing using a wired connection. If both are equally bad, then the problem is with your internet service provider.
10. Buy a new router This is a last resort. When you’ve tried everything and you’ve made sure the problem isn’t coming from your internet Wave customer service provider, buy a new router.
11. Change Computer DNS Settings
DNS is a name search menu on computers that use TCP or IP. Changing DNS settings will improve your internet connection. Change the computer’s DNS via Google’s DNS. If after the settings change the internet connection is still slow, do a network reset and flush. The trick, right-click select the Run Administrator menu type flushdns press enter, then access the internet several times.
12. Choose a Well-known Provider
The way to overcome slow wifi can also be by choosing a provider that is well-known and widely used. Look for a provider with a strong internet network and affordable quota prices. Sometimes, you have to pay a little more even for a provider that has proven to be good. Also adjust to your location. Sometimes, not all providers have a strong network throughout the area.
13. The distance between router and hardware is too far
The distance of the router that is far from the hardware will also make the wifi signal slow, and vice versa. Not to mention when considering the obstacles from the wifi signal such as walls or wood.